Atxnn Womens Tennis Skirt Pleated Double Layer Crossover High Waisted Athletic Golf Skorts Skirts with Pockets for Sports

Product Information

With right sides facing, pin skirt side seams. Try on for fit, adjust as necessary and sew side seams. Keep two fabric pieces right sides together. Fold by half. Start marking on the wrong side of the top side ( which is now on top) With right sides together, match shoulder seams, pin and sew. You may choose to stablise with a stay tape such as this knit stay tapeat the shoulder seam (optional). Press shoulder seams open. If you fall in between sizes, you can also cut between the lines, and you can ‘grade' from one size to another by, for example, cutting a large in the waist curving out to an extra-large at the hip if you need to. Adjustmentsto length. The dress is designed to fit an average height – I am 5'6″, and hits above the knee. If you are taller or prefer the skirt to be longer, simply add some length to the skirt piece at the bottom.

https://gandolfi.co.uk/product/all-leotards/gandolfi-navy-official-enrico-sleeveless-leotard-plain-front-with-belt-928/ Sew waist seam with 5/8th inch seam allowance. You may either leave as is and trim and finish the seams, or add an optional elastic waist. For all ballet students in all classes: Hair must be tied up and away from the face in a bun or alternatively please wear a hairband if your hair is short. Please do not wear any jewellery except stud earrings. For ballet exams and performances, we will be there to help to make a professional style ballet bun. To add elastic waist, make a casing by closing edges of waist seam without trimming, using an overcasting foot and stitch, or by sewing close to the edge. Leave an inch open and thread through a narrow 3/8th inch elastic. Split soled ballet shoes should not be worn by any dancer under the age of 14. They are not very beautiful and also can be potentially harmful. We do not recomend these until feet are fully developed as children’s feet and ankle bones are subject to rolling and imbalance.Pin the sleeves to the bodice, matching the sleeve center with the shoulder seam, and ease the sleeves to fit the opening. Sew. Trim seam and finish edges (optional.)

Measure bust round, waist round and hip round and the waist length and hip length from the shoulder. More details on Tips for DIY Sewing Measurements Take a piece of elastic – 1/4 inch wide about 9 inches long. Keep the elastic to the seam you have just madeAdjust to fit waist comfortably then stitch elastic ends together with a zig-zag stitch and close casing. If you need directions for cutting out your fabric, follow the general directions for the Summer Drape Top. I was able to comfortably cut the size Medium from 2 yards of 54-inch wide fabric, with some leftover.

Perhaps it shouldn't come as a surprise. It wasn't that long ago that it was deemed completely appropriate to wear Lululemon leggings everywhere. But with tennis skirts, one could argue there is more of a best-of-both-worlds compromise to the look, between wanting a super-short hemline for the post-pandemic debut of Pilates-toned legs and not feeling quite ready to give up the comforts of athleisure. Also, with those built-in shorts, couldn't it be that the tennis skirt—and its cousin, the golf skirt—is truly the last, and only, acceptable way to incorporate skorts into an adult wardrobe without feeling like a second grader? Maybe these early adopters are onto something after all. Seam allowances– 5/8th of an inch throughout unless mentioned. Use stitches appropriate for stretch such as a narrow zigzag or a stretch stitch if your machine has one.Start with the right-hand front bodice piece and using a disappearing fabric marker, draw lines from the inward and outward points of the zig-zags at the side seam, following the length shown on the pattern, making all lines finish evenly. Always test the fit using the paperpatternpieces, or aninexpensivetestfabricbefore cutting yourexpensivefabricfor this dress. If in doubt test the larger size and adjust for fitting at the side seams duringconstruction. I have attached lace . You can simply turn under the edges. If the fabric doesnot fray you can leave them as it is as well. Cut out E-G-C-J-B-S-E. You will have 2 pieces of the overlay like this – ensure that both are mirror images – one for left side and other for right side Pleat those lines together, matching the lines carefully and evenly, and pin in place. You should make 4 pleats.