Fire Door Gap Gauge Checker Tool, Small and Light, Pocket Fit

Product Information

A fire door, when used properly and fitted with approved and applicable accessories, can save both lives and unnecessary costs. There is an array of different fire door accessories, which benefit the workplace in the following ways: A fire door gap can be shortened through the use of surface-mounted smoke seals and rebated drop-down smoke seals. We can close the gap on existing fire doors easily using these products. This is suitable for an existing fire door gap up to 14mm on the underside of the door. If you'd like to know more about solutions that reduce your risks, make your buildings compliant and create safer environments for your people. Get in touch today. Make an enquiry Chat with us, Grab your gauge, find the size you are looking to confirm and insert the gap gauge under the bottom of the door and take an accurate measurement. The brown or white rebated intumescent fire door gap seal contains expandable intumescent material which, when subjected to heat, forms a tight seal around the fire exit.

The Agrippa acoustic wireless door holder can be programmed to register the sound of an alarm and only operate when the volume of that alarm is above a certain threshold. This means that it will not activate if a loud bang is heard, or any other startling noises. The fire door gap required varies according to the function of the door, however, best practice is to ensure that the gap:Keep in mind and note all clearance measurements on the pull side of the door so you can document them for your annual NFPA 80 inspection. Fire doors prevent smoke from spreading throughout your building, preventing injuries from smoke inhalation and burns. Occupants inside of your building can remain safe for a minimum of 30 minutes through the use of regulation fire doors based on the fire door gap.

Protecting people and property through 3rd party accredited Passive Fire Protection services, nationwide. We supply intumescent fire and smoke stop pillows, which are made of a hard-wearing fireproof glass cloth filled with an intumescent chemical. Purchasing new or replacement fire doors requires accurate measurements and detailed knowledge on required materials and hardware to ensure compliance with regulations. Fire doors are a vital aspect of fire safety in any building, but they must be installed correctly and in good condition to ensure that occupants and escape routes are protected from the rapid spread of fire and smoke. Step 3– Verify that your door gap gauge that the gaps fall within the clearances outlined by NFPA 80 and change as required. This is the ideal solution for holding a fire door open and is essential for areas where access is a necessity. We can program these devices to have timed releases which will ensure the fire door is then lightweight, easy to handle and swings freely.

Fire Door Clearance Gauge

The gaps between a Fire Door and its frame need to be 2 to 4mm in width to ensure that both the door can close smoothly and that the fire cannot spread through the gap of the fire door. Our Fire Door Gap Gauge is a handy tool designed for easy use thanks to the clearly marked dark blue "Recommended Door Gap" area. As smoke tends to travel faster than the fire itself, fire and smoke door seals act as a barrier between smoke and the interior of a building. By preventing passive inhalation at entry points, they can help protect residents from serious injury or death caused by exposure to toxic fumes during an emergency. Since they can be retrofitted to existing doors, they are suitable for use with older fire door assemblies that were built without seals. Fire door accessories: recommendationsFire door accessories assist with legal compliance and overall health and safety measures. We recommend that you keep the following in mind: In addition, the closing speed can be adjusted and holding angles can be set to between 65 ° and 105°.

Fire doors are a critical part of fire protection in buildings. A fire door is a type of door designed to slow the spread of fire, heat and smoke from one compartment of a building to another by isolating the compartments. Fire doors can be found in almost every commercial building and business premises. The clearance under the bottom of a door and raised non-combustible sills will be an optimum of 3/8 ″.

GET IN TOUCH

Please note: This service is for measuring and specifying new or replacement fire doors. Should you require a different service, please view our other fire door services or speak to a member of our team. Fire door accessories – like any other installation – require proper fitting and maintenance to function as they should. At All Things Inspector, we are experts at developing materials that help construction crews keep up with fire door compliance. The clearance at the underside of the bottom of a door and non-combustible surface shall not exceed 3/4 ″. Fire door closersThe purpose of a fire door is to compartmentalise different sections of a building and by doing so contain the spread of fires. An overhead door closer – or fire door closer – is a device that ensures that a fire door closes after being opened. Legally, fire doors should remain shut and the installation of fire door closers enforces this requirement.