About this deal
Bond-It Exterior Render Pregrit External bonding agent, a one part pre grit gripcoat paint coating. A ready-to-use internal plaster bonding agent with added aggregate to provide a key prior to plastering on smooth surfaces. Sand is softer than silicon carbide grit, and thus it cuts the glass very differently. All it takes is a little bit of imagination, and you can do many things with sand. During periods of snow and ice, footpaths will be gritted and cleared during normal working hours. Normally we do not pre grit footpaths.
Pregrit - any good? | The Original Plasterers Forum - The Pregrit - any good? | The Original Plasterers Forum - The
Do not use on new cement when cement has not fully cured. Do not use when the temperature is below 5 degree C. Simply apply one coat of the grit paint using a brush or roller and leave to dry for a minimum of 24 hours before plastering. Crossroads and connecting roads, accesses into industrial and residential areas. Residential areas, cul-de-sacs and other unclassified roads. Using sand with water, or even just water will do some degree of rounding. However, it is a far cry from what you would achieve from a 60/90 silicon carbide. Urban shopping areas and precincts. Routes to schools, health centres, hospitals, clinics etc. Main routes to residential areas.
I have a lot of silk painted artex walls/ceilings to skim, in the past I used a couple of coats 3-1 water/PVA but someone in the trade said they see a lot of plasterers using pregrit. Thoroughly stir before use and ensure application temperature is above +5 degree C and that the surface to be treated is free from dust, release agents and any contaminants that may hinder adhesion.
Pregrit A ready-to-use internal plaster bonding Plasterers Pregrit A ready-to-use internal plaster bonding
The plasterer has looked at the ceiling which has vinyl paint on the artex and is concerned the plaster may delaminate if he only uses PVA. He advised the best solution would be to overboard the existing ceiling with 9mm plasterboard which would give a better finish and one he could guarantee. Gritting and/or snow ploughing 24 hours a day on all days. Pre grit if required. Planned treatment or reacting to weather conditions. However he is happy to skim the ceiling if I give it a coat of PVA the day before he plasters so he can add a further wet PVA coat on the day.A one part, ready-to-use, extra grip, external render bonding agent with added aggregate to provide a key Read more inour Winter Maintenance Plan or our leaflet which explains how you can Get Ready for Winter. Ploughed snow at the side of roads The most commonly tumbled materials, agate, jasper, varieties of quartz, petrified wood, aventurine, or tiger’s eye, all have a Mohs Scale hardness of 7. Contains 1,2-benzisothiazol-3(2H)-one (BIT), 2-methyl-2H-isothiazol-3-one (MIT), mixture of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and