Makita DTD171Z 18V Li-ion LXT Brushless Impact Driver - Batteries and Charger Not Included

Product Information

The majority of our product range is battery powered, but our energy source is the customer’s satisfaction.

In line with all new Makita tools the performance increases whilst the overall size of the machines decreases. The new top-of-the-range Makita DTD170 impact driver has a compact overall body length of just 117mm and weighs only 1.5kg. MAKITA DTD170 FEATURES Offering a versatile specter of appliances, the tools are equally preferred by DIY enthusiasts and professionals around the globe. Makita DTD154 is one of Makita’s best selling impact drivers in the UK, and now, it has been replaced by the Makita DTD171. If you are looking to replace your impact driver and wondering if it is worth spending extra on DTD171, we will compare them side by side to see the differences. Torque Power Selection: The cordless impact driver has electronic 4-stage impact power selections to choose from. This allows you to have complete control of the tool thanks to the variety of power levels, allowing you to adjust the power depending on the task at hand.This will depend on what you plan to use it for. Power and size wise, you will not really notice the difference between the two. However, when it come to precision and control, The DTD171 is the best Makita impact driver for this. The DTD171 gives you more pre-set power options, as well as 4 assist mods for different types of jobs. Home/ Shop/ Power Tools/ Cordless Power Tools/ Cordless Impact Drivers/Makita DTD171ZJ Cordless 18V 1/4 Brushless 4-Stage Impact Driver And Makpac Case Makita DTD171ZJ Cordless 18V 1/4 Brushless 4-Stage Impact Driver And Makpac Case Both Makita impact drives have the same impacts per minute at 3,800 and no load speed at 3,600. It’s quite disappointing that Makita did not increase these in the DTD171, however, 3,800 IPM and 3,600 RPM is still very good. Brushless Motor

Works with all power tools that feature a yellow connector plate or has a star on the connector plate The DTD172 is a brushless impact driver powered by an 18v LXT Li-Ion battery. Key features include a LED job light with pre-glow & after glow function. The Makita DTD171 come with twin bright job lights on either side (left & right) of the impact driver for better illumination in dark spaces. The DTD154 has a single job light which is located above the trigger. Body size This is where you begin the notice the differences between the two 18v Makita impact drivers. The Makita DTD171 has 4 pre-set speed settings, and they are: Max:Makita believe that for a good tool you need a good motor, and Makita makes every effort to make sure their motors are of the best quality. They use premium grade steel to produce armature shafts and gears, and only steel of the highest grade is used. Brushless motor: The brushless design on this impact driver’s motor means that it continuously offers frictionless performance with little to no maintenance. This saw’s motor has a smaller number of moving parts, giving it the advantage of a more compact design.

At the heart of this tool is the brushless motor that allows you to use the impact driver efficiently. As part of the design, the tool utilizes every bit of battery power when you need, all while reducing the need for ongoing maintenance by reducing the amount of heat generated and working more efficiently. Their HQ is in Japan. Their Telford manufacturing plant is the only full-production facility for power tools in the UK and has been successfully running construction on many of our top line cordless power tools since 1991. Voltage: 18v Standard Bolt: M5-M16 High Tensile Bolt: M5-M14 Coarse thread (length): 22 - 125mm Max Fastening Torque: 180Nm Blows per Minute (Max) - ipm: 0 - 3800ipm Battery Type: Lithium-ion Vibration: Fastening Bolt: 13.5m/sec� Vibration K factor: 1.5m/sec� Noise sound pressure: 97dB(A) Noise sound power: 108dB(A) Noise K factor: 3dB(A) Body only machine: Net weight: 1.2 - 1.6kg No Load Speed (max/hard /med/soft): 0- 3600 / 3200 / 2100 / 1100rpm Impact Selection: 4 stage + Tek mode (x2) + Assist mode (x2) Driving Shank: 6.35mm (1/4") Hex Blows per Minute (Hi) - ipm: 0 - 3600ipm Blows per Minute (Med) - ipm: 0 - 2600ipm Blows per Minute (Lo) - ipm: 0 - 1100ipm Machine Screw: M4-M8 Although a century-old, Makita in terms of power tool manufacturer is relatively younger than its competition on the market. Thanks for taking your time to read our review of the Makita DTD171Z Impact Driver. Below we have included a full and detailed review of this highly popular choice for UK buyers.The new Makita DTD170 impact driver is technically a 6-function impact driver, with four speeds and matched impact power: then the newly introduced operating mode, 'T-Mode' is used for tightening self-drilling Tek screws and the new A-Mode (Assist mode) which, when selected starts the rotation slowly allowing maximum control of the screw as it starts to bite into the material. Once the impact driver detects the screw tightening it switches to full speed and full impact power to complete the tightening sequence. The A-Mode is designed to eliminate ‘screw cam-out’ and ‘cross threading’ caused by high speed rotation before the screw bites in the material. It features an electronic brake, a conveniently located push-button for forward and reverse and an LED job light with pre glow for use in low visibility applications. Electric Brake: The 18v brushless driver has an electronic brake control, so the motor will stop and cut out as soon as the trigger is released. This allows the power tool user to have complete control when on the job.

Compact design and ergonomic rubber soft-grip handle allow for comfortable use. Powerful 4-pole motor. Features a variable speed trigger and LED worklight with afterglow function. Ideal for all trade applications. Electronic 4-stage impact power selection providing a no-load speed of 3600rpm providing up to 3800ipm, the percussive action saving time and effort, driving screws up to 30% faster than a conventional drill/driver, no pilot hole is needed even into hardwood. If you haven't had one of these drivers before then I would suggest you give them a try. Most people wonder how they ever did without them as they are so much better than a standard drill. Founded a year after the outbreak of the First World War, Makita Corporation specialized in the mass production and maintenance of electric motors. The DTD has a 1 mode which is the following: Tek Mode – This mode gives you full power at the beginning of driving the screw in, once the screw is almost all the way in, the impact driver reduces power to ensure the screw is flush, and to avoid over tingeing of the screw, and screw cam-out. Is it Worth Upgrading From The DTD154 to DTD171?

The A-Mode is designed to eliminate screw cam-out and cross threading caused by high speed rotation before the screw bites in the material. The Makita 18V Li-ion Cordless Impact Driver, DTD171, offers users four speed settings, as well as 4 specifically designed fastening modes for optimum control. The impact drivers electronic controls find the best balance of speed and torque for each application for more efficient fastening. The 4-speed power selection switch provides the user with precise fastening control for a range of applications, from cabinet screws to lag bolts. The Makita DTD171 18V LXT Brushless Impact Driver from ITS is the topline 18V driver model available from Makita with an impressive list of specifications to show for it. The MAKITA DC18RC has a cooling fan that blows cool air into the battery. A digital power display identifies the condition of the battery and charging condition.