Aluminium Alloy Brass Steel Metal Polishing Buffing Kit 10pc 4" x 1/2" Pro-Max

Product Information

You could make this process take longer by working in a dedicated polish and then applying a wax/sealant, but after trying this myself, I could not notice much difference. The Zymol cleaner wax is seriously good stuff, giving the bike an incredibly deep, three-dimensional shine.

It’s nearly time to get polishing, but first you will need to apply a good amount of alloy wheel brightener. This product is designed brighten the aluminium and alloy parts, plus is a great product for removing brake dust. Apply an Alloy Polish of Choice After polishing, the residue of the compound is typically wiped off, and the metal surface may be further buffed or cleaned to achieve the desired shine. Different types of metal polishing compounds are available, each formulated for specific metals and applications. It's important to select a compound appropriate for the type of metal you are working with to avoid potential damage. If this happens you will see parallel tram lines along the surface that will show up on the finished item. The sisal mop is used until the work piece is uniformly buffed and further polishing doesn’t enhance the sheen. The bottom line here is that if the mop slows down substantially you don’t have enough power to hand. Also consider the size of the work piece. Large objects may be heavy and it’s probably easier to polish something like a bike wheel on a bench with a 4” mop on a drill than it is to hold the wheel up to a bench mounted 6” mop.If you discover damage to your alloys when polishing your alloy wheels. ChipsAway specialists can repair the damage in a matter of hours so your wheels look as good as new again. What we're looking to do here is remove the dirt from within the paintwork. I say within, because the finish on your bodywork is very much a three-dimensional. We're looking to get a deeper clean.

Metal polishing compounds can vary in abrasiveness, ranging from coarse compounds for heavy-duty polishing to fine compounds for achieving a mirror-like finish. They can be used on a wide range of metals, including stainless steel, aluminum, brass, copper, silver, and gold. It's important to dry off your bike. Some people recommend a micro-fibre drying cloth over a chamois, but I use a chamois. The main mistake I used to make was to fold up the chamois into four and then scrub at the bodywork to soak up water. You don't need to do this and all you'll do is rub any remaining grit across the surface, causing hairline scratches. Take your chamois and lay it across surfaces like your tank, take it off, wring out the chamois and repeat. On vertical surfaces, you can pat dry the surface, again, helping to reduce hairline scratches. You may be left with a small film of water or a few beads, but this is fine, they'll evaporate. Once you are happy that your alloys are sparkling clean, you need to thoroughly dry them. Use a clean, soft microfibre cloth to remove all moisture from the wheel, as this may react with the polishing treatments. Apply an Alloy Wheel Brightener As a rough rule of thumb a 370-500w electric motor should cope with a 6” mop. For 8” mops you’ll need a minimum of 500w and more if you can get it. On intricate castings or small parts it’s viable to use a cordless or normal powered drill and even on some large castings the easy access afforded by a drill makes the job simpler.Select below from our great range of Pro-Max Metal Polishing Compounds ideal for use on aluminium, alloy, brass, copper, steel, stainless steel and chrome. The final step is to apply a finishing polish to the alloy wheels. Apply the finishing polish with a soft microfibre cloth and polish until the cloth is free from product. The longer you polish the wheels, the shiner they will look, so keep polishing! When new, engine covers of Japanese machines were either polished and lacquered or painted. Add time, stone chips and ultraviolet light and the coating breaks down. Add in some road salt and the alloy starts to fester away gradually delaminating more of the protective coating to a point where the casting grows a furry grey overcoat.

Alloy wheels add style and substance to any vehicle, but alloys can get pretty dirty and fade overtime, especially if you do a lot of miles. Its important to care for the alloys as you would care for the car’s paintwork. To keep alloys looking as good as they should, they should be regularly polished to maintain the finish.As with all things the amount of energy expended on a job dictates how good the results will be; it’s not all about how hard you polish though. The annoying phrase…don’t work harder, work smarter….is very appropriate when it comes to polishing. When you polish a painted surface, you're removing miniscule layers of paint and in doing so you're creating a smoother surface, free from scratches and swirls. With a motorcycle's bodywork, unless you're very skilled with a polisher, it is best to polish by hand.

Take your Meguiars Hot Rims wheel cleaner, set the nozzle to spread the spray and give your pre-rinsed wheels a good coating with the wheel cleaner. It really is fantastic stuff and is safe for bare metal, alloys, lacquer, powder-coated and painted wheels. Within reason a larger power source will give better results, you’ll need to expend less time/effort/energy and there’s less likelihood of damaging the shiny bits. Bench or post mounted grinder/polishers generally have the guts to do the job but you need to match the mop size to the motor’s capabilities.

A Beginners Guide To Metal Polishing

Metal polishing compound is used to remove surface imperfections, oxidation, and tarnish from metal surfaces, thereby restoring their shine and luster. It is commonly used in various industries, such as automotive, jewellery, manufacturing, and metalworking. I've chosen Zymol cleaner wax to accompany the Zymol car shampoo used earlier. It's now strictly a polish, but it is a wax polish, and by far the best one I've used to get a deep shine.