LTP Grimex - Heavy Duty Cleaner, Grease and Grime Remover 1 Litre

Product Information

Tips: LTP Grimex is effective at removing the seal from natural stone surfaces. After using LTP Grimex you may wish to re seal or enhance your surface using an appropriate sealing product.Maintaining your sealed surface with the correct maintenance product will extend the life of the seal and offer additional protection. So, now we know what porcelain slabs are, lets delve into the best ways to clean and care for your paving. We’ve offered care guidance for each stage of your paving installation project. For routine cleaning of your porcelain paving, washing down your patio or driveway with hot soapy water should be sufficient. However, rather than a powerful jet washer, it’s recommended you use a low setting or simple hose on treated surfaces. This will agitate the surface but won’t reduce the effectiveness of the treatment.

Customers are advised to test the solution on an inconspicuous area before general application. Any alkalinity remaining on surfaces treated with this product should be completely neutralised. This may be done with a little clean water applied by sponge. Or if you’re considering an indoor installation, our guide on how to clean tiles before grouting features plenty of helpful advice.Use undiluted and agitate with scrubbing brush or mechanical scrubber if necessary. Neutralise treated surface with clean water after use.

OMG ~ I did try the few drops to a gallon but soon resorted to neat with a yard broom to scrub. Four tiles at a time, work GRIMEX into the tiles and wait. Srub with a bit of water, scrub with more water, mop with a lot of water. Rinse and admire the result. Grimex is effective at removing stains such as oil, grease, ingrained dirt, grime and old wax layers from all artificial and natural stone and tiles. Ideal for general stone care and for use in the restoration of artificial and natural tiles and floors. It is especially effective on limestone, slate, porcelain and quarry tiles. LTP Grimex helps remove stubborn stains and existing layers of sealant from floors and tiles. It is also suitable for the general maintenance cleaning of external driveways, patios and paths. This year marks the 35th anniversary for LTP’s Grimexdeep cleaner – one of LTP’s top-five best selling products. The heavy duty “grime and stain remover” remains a firm favourite within the tiling and cleaning sectors, providing a solution for a myriad of issues, indoors and outdoors. Still featuring the original formulation, Grimex is designed for all types of natural and engineered stone and tile, from limestone and marble, to ceramic and porcelain. It can be used to remove residue before application of a sealer; to daily and deep clean surfaces and to renovate tiles in all environments, including historic settings. Spread out evenly using a roller, sealer applicator, paintbrush or sprayer. Allow to dry for 30 minutes. Apply a second coat and leave to cure for a minimum of 1 hour before grouting. I should have sought advice on day one ~ GRIMEX world like magic but doing a whole floor in one go has me beat. I do a section at a time and the results are fantastic.However, if you prefer a non-rinse option, our specially formulated LTP Porcelain Floor Tile Cleaner is a great choice. A gentle solution designed for cleaning porcelain patio tiles without damaging the product or grout, you can use it easily by following these steps:

TIPS: LTP Grimex is effective at removing the seal from natural stone surfaces. After using LTP Grimex you may wish to re seal or enhance your surface using an appropriate sealing product. Dilute one part LTP Grimex in 3 parts warm water. Apply liberally, spreading over surface of tiles. If necessary agitate with a scrubbing brush. Leave to react for 5-10 minutes, keeping wet with additional solution. Agitate surface again, mop up and rinse thoroughly with clean water. Applying grout cleaner can be a pain. It doesn’t always work first time, and heavy duty models - as effective as they are - can cause skin irritation if you’re not properly protected. The manufacturer suggests that protective clothing, eyewear and gloves are worn and that it is to be kept out of the reach of children. If irritation occurs, it is advised that you seek medical advice or attention. It may be tempting to use 10mm porcelain tiles for your external paving project, either because you like a particular design or colour, or the tiles are a lot lighter and easier to handle than purposeful 20mm outdoor porcelain paving. However, we recommend against using 10mm tiles for your external paving project.

This year marks the 35th anniversary for LTP’s Grimex deep cleaner.One of LTP’s top-five best selling products, the heavy duty “grime and stain remover” remains a firm favourite within the tiling trade, providing a solution for a myriad of issues, indoors and outdoors. Important:Test the solution on an inconspicuous area before general application. Any alkalinity remaining on surfaces treated with this product should be completely neutralised. This may be done with a little clean water applied by sponge. This rapid-action cleaning agent is suitable for porcelain paving and can remove cement residues, grout stains, salts, efflorescence, and similar deposits. The best way to clean porcelain slabs: Jointing compound is made from different ingredients to cement or sand base trowel-in grouts, so removing residues requires a specific solution. LTP Solvex is a high-performance, non-caustic remover designed to soften polymers, making residue easy to remove. To restore your paving, use the following process: