ASICS Gt-2000, Men's Gt-2000 9

Product Information

The manufacturer may, under the responsibility of the notified body, affix the latter's identification number during the manufacturing process. the technical design specifications, including the European specifications referred to in Article 2(2) of this Directive, that will be applied and, where the European specifications will not be applied in full, the means that will be used to ensure that the essential requirements of this Directive that apply to the products will be met,

On the basis of the provisions referred to in paragraph 1, Member States may not prohibit, restrict or hinder the free movement of safety components and subsystems referred to in Annex I which are accompanied by an EC declaration of conformity within the meaning of Article 7 or Article 10. Member States must ensure that the safety analysis, the safety report and the technical documentation are provided and include all the documentation concerning the characteristics of the installation and, where appropriate, all the documents certifying the conformity of the safety components and subsystems referred to in Annex I. In addition, documents must exist setting out the necessary conditions, including the restrictions on operation, and full details of servicing supervision, adjustment and maintenance. the measures are justified, it shall immediately so inform the Member State which took the initiative and the other Member States; where the decision referred to in paragraph 1 is based on shortcomings in the European specifications, the Commission shall, after consulting the parties concerned, initiate the procedure referred to in Article 2(7) if the Member State which has taken the decision intends to maintain it, The manufacturer must, for period ending at least 30 years after the last component has been manufactured, keep at the disposal of the national authorities:The manufacturer must operate an approved quality system for design, manufacture and final component inspection and testing as specified in point 3 and shall be subject to surveillance as specified in point 4. a) submit the safety component to a conformity assessment procedure in accordance with Annex V, and Member States shall take all necessary measures to ensure that subsystems within the meaning of Annex I are placed on the market only if they permit the construction of installations complying with the essential requirements referred to in Article 3(1). Where a Member State or the Commission considers that a European specification as referred to in paragraph 2 does not entirely satisfy the essential requirements referred to in Article 3(1), the Commission or the Member State concerned shall bring the matter before the committee referred to in Article 17 giving the reasons therefor. The committee shall deliver an opinion without delay. define and implement all necessary measures to protect against risks which cannot be eliminated by the design and construction features,

Opinion of the European Parliament of 6 April 1995 (OJ C 109, 1.5.1995, p. 122), confirmed on 27 October 1999 (not yet published in the Official Journal), Council common position of 28 June 1999 (OJ C 243, 27.8.1999, p. 1) and Decision of the European Parliament of 27 October 1999 (not yet published in the Official Journal). Council Decision of 16 December 1999. Where Council Directive 85/337/EEC(4) so requires, the effects of cableway installations on the environment must be assessed; above and beyond the effects mentioned in that Directive, both environmental protection and requirements in connection with the sustainable development of tourism should be taken into account.And as someone who is always wary of ankle and Achilles tightness or strains, the heel felt comfortable and reliable for plenty of miles. No heel slipping The notified body must examine the component and must carry out the appropriate tests as set out in the relevant European specifications referred to in Article 2(2) of this Directive, or equivalent tests, to ensure its conformity with the relevant requirements of this Directive.