Sika Aquaseal Waterproof Tanking Membrane, Blue, 5 Litre

Product Information

Aquaseal Waterproof Tanking Membrane 5LTR Forms a permanently flexible watertight membrane, applied by brush, two coats. We’re the nation’s leading trade supplier with over 25 years’ experience. Whether you’re looking for internal or external tile adhesive, or even wood or tile on tile solutions, we’ll have a product that does the job. The flexible drain mat was then applied around the floor drain. This mat can also be applied around any inlet and outlet pipes in the walls and floors and allows for any expansion and contraction in the hot and cold water as it flows through the pipes of down the drains. Waterproof tanking is the most important stage in any wet room installation. It’s essential to use high-quality, durable waterproofing systems to create a space that’s built to withstand constant wet conditions – and our wet room tanking materials are designed to do just that. As the video shows, we first made sure that the floor and walls did not have anything loose on them and swept the areas to be covered thoroughly.

Use in showers, wet rooms, wet zones in bathrooms and other tiled areas subject to water exposure such as balconies and partially covered external areas.Aquaseal Waterproof Tanking Tape 10MTR Self adhesive joint corner sealing tape. Easy to apply with pre-cut release liner. Aquaseal Waterproof Tanking Membrane (5LTR) - Forms a permanently flexible watertight membrane, applied by brush, two coats. Our ready-mixed tile adhesives are a convenient choice, with general-purpose, water-resistant and grout options available. For a strongbonding porcelain tile adhesive, our powder range is up to the challenge. This range also features a white wall and floor tile adhesive for neat and tidy results.

Pay careful attention to edges and corners to ensure that the coverage in these areas is always consistent as these are the potential weak spots where leakage could occur.Aquaseal Waterproof Tanking Primer (1L) - For use before applying Tanking Membrane and Tanking Tape. litre of liquid tanking primer (Styrene Acrylic based polymer) with a drying time of 1 – 2 hours depending on temperature of bathroom or wet room. For very porous surfaces, such as plasterboard, two coats will be required Everbuild Aqualseal Wet Room Tanking System Kit for 4.5sq Metres What is in the Standard Size Aquaseal Wet Room and Tanking Kit From Everbuild? For bonding and sealing joints, look no further than our tile grouts for protection against discolouration, water and mould.

The Tanking Drain Mat is also recommended around the drain outlet and to reinforce floors and floor joints which is the area most susceptible to leaks. A ready to use primer, applied by brush to all porous and semi porous surfaces in the areas that are to Then we applied the second coat of the membrane making sure we finished off with horizontal strokes with the 3 inch brush which is supplied with the kit. Then we applied the Aquaseal primer with a 3 inch brush to the floor and the walls. This could be done with a bigger brush or even a fleece roller.Then the vertical joints in the wall were sealed and all tape was pressed down thoroughly with the roller that is supplied with the wet room kit. Aquaseal Tanking Tape provides cross directional movement at corners and on board joints and is available in 10 Metre rolls. Based on tried and tested wet room tanking principles used in areas such as Scandinavia and Germany where wet rooms have been common for many years. We always recommend the use of Tanking Tape on corners and board joints prior to applying the membrane to ensure the integrity of the watertight seal.