New 12w LED Driver Transformer for MR16- MR11- G4 LEDLight Bulb Zero Interference with Dab and WiFi Energy Class A++

Product Information

MR16 LEDs operate on a lower voltage of 12 volts compared with the more popular mains, 230 volt GU10 LED cap type.

The Varilight YT transformers combined with the Varilight V-Pro dimmer switches are compatible, as are the Philips MR16 LEDs.If you're looking for a smaller style of LED downlight, check out our miniature LED downlights which are available with cut out size of just 25mm. If you do not allow these cookies, some features may not work and we will not know when you have visited our site. Light bulb voltages While there are many different light bulb fittings and bases, perhaps the most important difference is the voltage they operate at. This is a great value LED driver that delivers outstanding performance with flicker free output and thermal overload and temperature protection built in. Please note that the drivers listed below are for non dimmable bulbs and should not be used with a dimmer switch.

If LED bulbs or strip lighting are to be connected together in series or parrallel the correct LED driver should be used that matches the required power. The transformer you need for strip lighting depends on multiple factors, such as the length of strip, watts per chip and total wattage. This LED Transformer / Driver is used to power low voltage (12v) LED (Non dimmable) bulbs and strip lighting.

For example, four 5w LED lamps in a small room will only total 20w whilst the minimum load on a 250w dimmer is 25w. On the other hand, using LED’s with a standard transformer may have a detrimental effect on a bulb’s longevity.

Matt white remains the top choice for downlight finishes due to its universal appeal and it blends in with white ceilings.Products have a Warranty of between 1 and 5 years, please see the product pages for detailed information. Then its back to the drawing board which means replacing the old transformer with a new LED compatible one which would be the Varilight YT transformers.

This means that you will be responsible for and DUTY and/or VAT payments that are applicable in your country. Facebook: We use conversion tracking from Facebook to help us understand how effective campaigns are from Facebook. higher with a wire-wound transformer, a significant increase in power consumption considering MR16 LED lights generally use between 4-10W. The size has also been reduced, leaving a sleeker, quieter, cooler driver to supply your lower-voltage lighting.Either way, its a very good design and is available in a variety of finishes, colour temperatures and with an insulation coverable version. If you are going to spend money replacing your MR16 halogens with LED bulbs then please think about also replacing your transformers with these drivers. MR11 LEDs are smaller than MR16 meaning they are not as bright but allow them to be fitted into smaller downlights. This LED Driver is the perfect product to replace the 12v transformer which is currently powering your existing low voltage MR16 or MR11 Halogen bulbs and strip. To check you have enough power ensure that the LED driver power rating in watts equals or exceed the total bulbs connected.