PipeSnug - Waste Pipe Collar and Seal, Black 40mm (1 1/2") (Pack of 3)

Product Information

It should be noted that the fit is only really snug when the pipe fitting is pushed into the collar I did not use a pipe fitting on the inside section of pipe but this allows a bit of wiggle room for lining up the interior fittings. This seal will close flammable pipes that are 40mm in diameter for up to 240 minutes, and can be face fixed to a wall or ceiling structure. Intumescent pipe collars are manufactured from a high performance material bonded to the inside of a steel sleeve.

Applying the collar is easy - simply cut it to the required size, slip it onto the pipe, and secure it in place using a metal pipe clamp.Although it is extremely rare for damage to occur during transit, please remember that a consignment must not be signed for if there is any evidence of damage. Interior Designs – We can help design your workplace right from the initial idea, bringing your vision to life! A lightweight up to 4 hour fire barrier comprising of a rock mineral fibre board with an elastomeric, ablative water-based sealant.

This right stipulates that for most products purchased online you have a legal right to change your mind within 14 days and receive a refund under the consumer contracts regulations 2013. We open from 7:30am to 5:30pm to answer your questions as well as creating bespoke quotes and material calculations. Additional benefits include holding your pipework in place, leaving you with two free hands to fix the pipe clips and requiring less time up a ladder. Easily installed in seconds, PipeSnug creates a clean, professional air-tight finish every time with no mess. Tested for use with combustible pipes, insulated non-combustible pipes, cable bundles and Bevex pipes.uk/pipesnug-solvent-weld-waste-pipe-collar-white-40mm-2pk-109135930 242215 PipeSnug Solvent Weld Waste Pipe Collar White 40mm 2pk https://www. In addition, Rockwool Fire Pro CE 2 Hour 40mm Pipe Collar can be installed on flexible wall, rigid wall and rigid floor constructions. I drilled a hole through the wall using a 52mm diamond core drill and used one of these seals on both the inside and outside holes, they fitted snugly, gave a really neat finish and hold the pipe very securely. All damaged or missing items should be reported to the driver and signed for as damaged or missing, wherever possible. The QWR CE Marked Fire Collar has built in fixing lugs which are used to secure it to the structure, and can be used in conjunction with QF2 Fire Protection Compound.