Creality Official Ender 3 Pro 3D Printer with Flexible Magnetic Plate Resume Printing Printing Size 220x220x250mm, 3D Printer for Beginners

Product Information

To remove the print, I peeled the flexible magnetic build plate off and bent slightly, allowing the print to pop right off. Both hotend designs are not ideal, and I had issues with them during the tests, but I’ll get to that later. Heat up your hot end and extrude 100mm by selecting 'Prepare' > 'Move axis' > 'Extruder' > 'Extruder 1mm' and then rotating the knob until you get to 100mm.

Here and on some other smoothly curved surfaces is unfortunately where the Ender-3 Pro shows one of its weaknesses due to the use of the older stepper motor drivers. At this point I checked the height of both sides against the top of the base extrusions using a steel rule, to make sure it was horizontal. Equipped with CR Touch, the 16-point automatic leveling can complete quickly with compensation for points' printing height on the heat bed. This set contains 4 adjusting wheels that have been specially developed by Creality 3D for the CR-10, CR-10S, CR-10 Mini and the Ender-3 3D printers.This bonding platform is made of polyetherimide (PEI) and provided with a special No-Cleanup bonding adhesive. Notes: The firmware is Ender-3Pro CR-touch/BL-touch version, compatible with support for filament detector. Once the model is finished printing, remove the magnetic upper from the lower and bend or flex the print surface to watch the model effortlessly pop off the printing surface. If you share your network connection, ask your administrator for help — a different computer using the same IP address may be responsible.

Both machine have a very similar extrusion system with a feeder located on the left side of the X-axis and a Bowden tube that guides the material into the hotend. This Creality 3D Sprite extruder pro kit can be used to replace the original extruder pro kit if it is damaged or old. I've done a lot of messing about with mine, and feel I can generally get good prints, but it has taken some tinkering around. The Ender 3 Pro ships with a microSD card that contains a user manual, a troubleshooting guide, various USB drivers, and several pre-sliced models in .

The Alfawise definitely has more state of the art components, with the color touchscreen and Trinamic drives, but has a fixed bed some wiring issues and a smaller community. The issue was to do with the bowden tube a simple snip and hey presto machine working to the max again. This model showcases everything one would want from an affordable 3d printer: a smooth surface, precisely engraved message and overall great quality of printing. The Creality 3D Ender-3 Pro V-slot Prusa I3 DIY 3D Printer (to give its full name) is an entry level 3D printer.

The trick with the carriers is also to tighten eccentric nuts so there is no wobble, but must drop on its own using gravity. Thanks to the Plug and Print principle, you can easily connect the Creality 3D pad to your 3D printer. Creality also includes a video showing the assembly process on the microSD card if you prefer a video guide instead of a written one. I've just mainly printed add-ons for the printer and some knick-knack type things, but I'm ready to try some bigger prints. They also seem to keep their level quite well over the couple of hundred hours I used them, and I rarely had to readjust the nuts.Since the machines are so similar, I used the same G-Code always for both of them, which lets us compare the results quite nicely. In addition, the open-source Ender 3 Pro has a large and robust user base and multiple online communities dedicated to modifying and experimenting with their Creality machines. Use this set to replace your current bonding platform or as an additional build plate to continue printing quickly after your print is finished. This gold Aluminium MK8 extruder upgrade kit replaces the original plastic extruder which is less durable and can lead to extrusion problems in the long run.

gcode This file just moves the head to the four corners and centre in turn, allowing you to test the bed height with a piece of paper. This red aluminium MK8 extruder upgrade kit replaces the original plastic extruder which is less durable and can lead to extrusion problems in the long run. Due to it’s popularity, it has a huge community, and there are by far more printable upgrades or even purchasable ones available.I'm still tinkering around with it, but took time to print a bunch of face mask ear-savers, which I had no problems doing. A clear sign of the bed level being out is the initial brim being dragged and not sticking to the bed.