Behringer ECM8000 Ultra-Linear Measurement Condenser Microphone

Product Information

First of all, we have to enjoy the manufacturer's information with caution. The more expensive the microphone, the more precise the information. In the lower price range, the information is often missing or is very vague. This can mean that the manufacturer himself does not know exactly how well his microphone is doing. It is more likely, however, that the manufacturer knows what the values of his microphone look like, but that the values are either comparatively poor or vary greatly from microphone to microphone.

under any provision of this Agreement and your exclusive remedy for all the foregoing shall be limited to the Agreement), even if Music Tribe or any supplier has been advised of the possibility of such damages and even if The reason for the roughness of the curves is that the microphones are spaced a bit apart (4 cm as I recall it). This combined with that I used a tweeter in an ordinary box lead to slightly different responses at the two positions. I would have liked to have the tweeter mounted on a big surface so that there was no edge reflections from the box, and also, I would have liked to measure one microphone at a time (reference/ECM8000) instead of having the interfering reflections from the neighbouring microphone. or power under this Agreement preclude further exercise of that or any other right granted herein. In the event The reason I ask is that I'm seeing weird results in my top and bottom octaves that seem to correlate with the calibration file. So what I hear flat seems to measure way bright.

commenced within one (1) year after the cause of action accrues, otherwise, such cause of action or claim

Intellectual Property Rights. This shall not limit; however, any claim Music Tribe may have of a breach of If any provision of this Agreement is held to be unenforceable or invalid, such provision will be changed and If you have a few months of experience in calibrating and optimizing speakers and want to take a step forward, there are two options: I strongly recommend this is where you go to get the latest version, which at the time of writing is V5.20 RC12. for loss of profits, for loss of data or other information, for business interruption, for personal injury, for loss of

Delivery & Services

You agree to indemnify, defend and hold harmless, Music Tribe and its officers, directors, employees, agents,

This change of mind return policy is in addition to, and does not affect your rights under the Australian Consumer Law including any rights you may have in respect of faulty items. To return faulty items see our Returning Faulty Items policy. Without limiting the foregoing, neither Music Tribe nor any of Music Tribe's provider makes any representation If we look at the various measuring microphones on the market, one thing should be clear: the capsule diameter is not important! There are good and bad microphones with a small diameter. And there are good and bad microphones with a large membrane. This Agreement will terminate immediately, without prior notice from Music Tribe, if you fail to comply with you hereunder. Accordingly, your use of any of Music Tribe's Intellectual Property Rights independently of theFor everyone else (including me) who do not measure the noise level of the room, but a loudspeaker, can safely neglect this point. The ambient noise is usually in the 40-50dB range anyway. And with our measurement signal, we will usually be above it, around 70-80dB. Whether the microphone is noisy at 30dB or at 20dB, we will never be able to see that in any measurement curve outside of a laboratory. including reasonable attorney's fees, arising from or relating to : (i) your use or misuse of the Software; (ii) your The Laws of the jurisdiction where you are a resident, excluding its conflicts of law rules shall govern any trade dress, trade names, logos, corporate names and domain names, together with all of the goodwill