14 Piece Injection Puller Tool Bosch Delphi Deso Siemens Diesel Injector Remover

Product Information

The Laser Tools range includes many diesel and petrol injector extractors but this new extractor (part number 7802) has been specifically designed to allow the user to extract the Bosch CR solenoid type diesel injectors without the need to remove the injector solenoid or internals.

Injector Removal Tools - Darwen Diesels Ltd

Tools that use nothing more than the user’s strength are generally cheaper and simpler than those powered by hydraulics. They may not provide the same pulling force but can generally give better accuracy and aren’t as cumbersome to use in cramped engine bays. Less complexity also leads to a lighter tool, as well as reducing likelihood of failure. Hydraulic This tool was designed for use on Renaults and Nissans equipped with the M9R engine, but will also work on the Vauxhall Vivaro thanks to being an almost identical vehicle. The tool is manufactured in the EU and is designed to mount directly onto the injector and over the solenoid. It is secured tightly in place by four screws and tightened with a 3mm hex key. The tool grips the injector securely while protecting the solenoid from damage. Once in place, a slide hammer is attached, suitable Laser examples include the 2.2kg hammer (part number 5850), or the 4.4kg version (part number 4811).

Back in stock alert

This kit is designed for use on all M9R-equipped vans, including the 2006-2014 Vauxhall Vivaro. The kit also covers some vehicles with M9T and R9M engines (found in newer Vivaros with the 1.6-litre engine).

Remove A Diesel Injector The Easy Way Hubitool How To Remove A Diesel Injector The Easy Way Hubitool

Reliability however, cannot always be taken for granted. Most Vivaros (1 st generation 2006-2014) were fitted with the Renault-Nissan designed M9R 2.0-litre diesel engine. In general, these engines are known to be reliable and simple to fix, that is unless a fuel injector should go wrong. Geschikt voor onder meer: Ford Edge, Focus, Galaxy, S-Max (uit 2018); Kuga, Mondeo, Ranger (from 2019); Tourneo, Transit (uit 2016). Einsatzmöglichkeiten u. a.: Ford Edge, Focus, Galaxy (ab 2018), Ranger (ab 2019), S-Max (ab 2018), Tourneo, Transit (ab 2016).

🍪 Privacy & Transparency

De Laser 8288 injectortrekkerset is ontworpen om de Ford EcoBlue dieselinjector er geheel uit te trekken. Eerder konden de EcoBlue-injectors alleen verwijderd worden als de brandstofteruggaveaansluiting en Piezo-kop verwijderd werden door deze af te breken, waardoor de injector onbruikbaar werd. Met deze set kunnen deze injectors eruit getrokken worden zonder dat de injector eerst kapot gemaakt hoeft te worden. OPMERKING: Als de injectors vastgegrepen worden maar niet kunnen worden uitgetrokken, zie Laser-onderdeelnr. 7912. First open the bonnet, then find the valve cover on the engine, remove the bolts using a wrench then pull the valve cover from the engine. Next find the injector fuel lines that supply the injector, screw into the engine near the injector, the injectors will all have their own supply line. You can then remove the nut that keeps the supply line to the injector in place, then pull the fuel supply line out of the engine with your hands. You will then need to find the injector hold down which will be held in place with two bolts, you can remove these bolts and pull the injector away from the engine. Hold the top end of the injector and pull it out, you can then replace the injector should you need too.